Chapters authored
Simulation Analysis of DFIG Integrated Wind Turbine Control System
Recently, scientists and academics are discovering progressive improvements in the arena of wind power technology economically and reliably, allowing them to produce electricity focusing on renewable energy resources. Wind turbines (WT) using the Doubly Fed Induction Generators (DFIGs) have attracted particular attention because of their advantages such as variable speed constant frequency (VSCF) operation, independent control capabilities for maximum power point tracking (MPPT), active and reactive power controls, and voltage control strategy at the point of common coupling (PCC). When such resources have to be integrated into the existing power system, the operation becomes more challenging, particularly in terms of stability, security, and reliability. A DFIG system with its control strategies is simulated on MATLAB software. This entails the rapid control prototype testing of grid-connected, variable speed DFIG wind turbines to investigate the WT’s steady-state and dynamic behavior under normal and disturbed wind conditions. To augment the transient stability of DFIG, the simulation results for the active and reactive power of conventional controllers are compared with the adaptive tracking, self-tuned feed-forward PI controller model for optimum performance. Conclusive outcomes manifest the superior robustness of the feed-forward PI controller in terms of rising time, settling time, and overshoot value.
Part of the book: Wind Turbines